Mavroseal Fluor Facade coating
PRODUCT DESCRIPTION
Mavroseal Fluor is a waterborne facade coating based on fluoropolymers.
Mavroseal Fluor not only makes the surface long-term water-repellent, but also has strong grease- and dirt-repellent properties.
Mavroseal Fluor penetrates deep in to the surface resulting in an invisible, effective and long-term effect.
USE
Mavroseal Fluor has been specially developed for application on lightly porous mineral surfaces such as tiles, natural stone, concrete and pavers.
Mavroseal Fluor is widely applied on areas that are prone to stain due to grease- and food residues. Examples are shopping malls, kitchens, terraces, stairwells, squares and busy streets.
CHARACTERISTICS
• Invisible, transparent
• Durable and wear resistant
• Suitable for many types of mineral surfaces
• UV-resistant
• Safe and easy to use
• Straightforward application
PACKAGING
5 and 10 L.
INSTRUCTIONS
1. Ensure that the surface is clean, dry and dust-free.
2. Apply Mavroseal Fluor undiluted with a low pressure spray or short-haired roller.
3. Apply a second layer wet-on-wet to ensure complete saturation of the surface.
4. Remove excess material with a lint-free cloth.
APPLICATION CONDITIONS
Ambient temperature: maximum 30°C, minimum 10°C
Substrate temperature: maximum 30°C, minimum 10°C
Relative humidity: max.85%
DRYING
Dust-free: 10 - 20 minutes
Dry: after approx. 1 - 1.5 hours
Fully cured: after 6-8 hours
CONSUMPTION
Consumption is 2-7 m2/L, this depends on the absorbency and porosity of the surface.
STORAGE
Can be kept for at least 12 months in original unopened packaging.
Store in a cool, frost-free place.
HEATLH AND SAFETY
Mavroseal Fluor is not classified. If in doubt, always consult the safety data sheet or our R&D department.
-
Icon
-
Icon
Support
Our advisors are happy to help you
-
Icon
Pay later!
Afterwards pay possible!
-
Icon