Graffiti Shadow Remover Gel

PRODUCT DESCRIPTION

Shadow Remover Gel s a specially developed graffiti shadow remover. Shadows often remain after graffiti removal, especially on porous surfaces such as masonry and concrete.
Shadow Remover Gel penetrates deep into the pores of the substrate through the special composition to remove the last shadows.
Shadow Remover Gel is suitable for both indoor and outdoor use and is completely biodegradable according to the OECD test 302b.
Shadow Remover Gel is a gel product and is therefor very suitable for application on vertical surfaces such as walls and facades.

USE

Shadow Remover Gel is particularly suitable for porous surfaces such as granite, natural stone, concrete, masonry, tiles, wood and limestone.
Shadow Remover Gel is also suitable for many non-porous, smooth surfaces. Always place a test piece to make sure that the substrate is not affected.
Do not use Shadow Remover Gel on soft metal surfaces such as aluminium and copper!

CHARACTERISTICS

• Effectively and quickly removes shadows
• Applicable on almost all surfaces
• Completely biodegradable
• Very suitable for application on vertical surfaces where a longer treatment time is required
• Dries slowly and therefor has a longer and more effective function.

PACKAGING

1 and 5 l

OPERATING INSTRUCTIONS

1. Apply Shadow Remover Gel undiluted to the surface with a chemical resistant brush.
2. Allow the product to work on the surface for 2-30 minutes.
3. Jet the shadows off with high pressure (70-150 bar) and hot water (40-90°C).
4. For the removal of shadows on light porous surfaces such as plastic, Shadow Remover Gel can be applied with a power sponge to efficiency.

APPLICATION CONDITIONS

Shadow Remover Gel can be used in all dry weather conditions.

THEORETICAL CONSUMPTION

Consumption is between 2-5 m2/L depending on the contamination.

STORAGE AND STABILTY

Can be kept for at least 24 months in original unopened packaging.
Store in a cool and frost-free place.

SAFETY PRECAUTIONS

HEALTH AND SAFETY
Can cause severe burns and permanent eye damage. Avoid skin and eye contact at all times, wear suitable gloves, protective clothing and safety goggles. In case of contact with skin or eyes, rinse immediately with plenty of water. When in doubt, always consult the safety data sheet or our R&D department.