Call us

+31 418 680 680

Strip-Off HD Strong paint stripper

Do you want to remove layers of old paint without damaging the surface? Strip-Off HD is a powerful paint stripper developed to do just that. It will remove all kinds of paint, resin and other tough layers from most porous and non porous materials. Strip paint quickly and safely!
In stock
Only %1 left
As low as €24.57
Delivery is NOT included in the price
Tax excluded


Strip-Off HD is a powerful gel stripper based on formic acid and powerful solvents.
Strip-Off HD has been specially developed for removing the most durable 2-component epoxy and polyurethane coatings and other stubborn paint layers.
Strip-Off HD is a gel-like product which allows for good adhesion on vertical surfaces and longer dwell times.


Strip-Off HD can be used on concrete, stucco, granite, masonry, wood, plastics, glass and metal.
Strip-Off HD do not apply on acid-sensitive surfaces such as marble, limestone and some metals. Always put a test piece in advance.


• Very powerful and fast effect
• Biodegradable
• Removes several layers of durable paint
• Strong adhesion and long open time for optimal effect
• Also effective as a glue remover


1. Apply Strip-Off HD undiluted with a brush or roller in a thick layer.
2. Allow the product to work for 30 minutes to 36 hours depending on the temperature and the number of layers of paint. Prevent the product from drying. For long exposure times, cover the surface with foil to prevent drying.
3. Spray the dissolved paint from the substrate with high pressure (50 - 300 bar) and hot water (70 - 90 ° C). Work from the bottom up. Adjust the pressure to the substrate.
4. Scrape off the dissolved paint on sensitive surfaces with a putty knife or plastic scraper.
5. After cleaning, rinse the surface


Strip-Off HD can be used in all dry weather conditions..


Consumption is 0,25-2m2/L, depending on the surface and amount of paint layers.


Can be kept for at least 24 months in original unopened packaging.
Store in a well-ventilated, cool and frost-free place.


Avoid inhalation, provide adequate ventilation. Avoid skin and eye contact, wear suitable gloves, protective clothing and safety goggles. In case of inadequate ventilation wear a suitable ABEK filter. When in doubt, always consult the safety data sheet or our R&D department.s.

Consumption is 0,25-2m2/L, depending on the surface and amount of paint layers.