Call us

+31 418 680 680

Facadeclean Extra Strong Facade cleaner

The most powerful facade-cleaner for extremely soiled mineral surfaces.
In stock
Only %1 left
As low as €231.90
Delivery is NOT included in the price
Tax excluded


FacadeClean Extra Strong is a very concentrated acid facade-cleaner based on hydrofluoric acid (HF) and phosphoric acid.
FacadeClean Extra Strong has a very powerful efficiency and is applicable on the most extreme soiled mineral surfaces.
FacadeClean Extra Strong effectively removes common facade contaminations and scale build up.


FacadeClean Extra Strong is suitable for most mineral surfaces including concrete, masonry and pavers.
FacadeClean Extra Strong is not suitable for glass or calcareous stones such as marble and travertine.


• Very powerful
• Highly concentrated
• Fast-acting
• Very thorough and efficient cleaning that removes all types of facade contaminations and scale build up


10 L


1. Before applying FacadeClean Extra Strong make sure to cover all surfaces that will not be treated with plastic, such as paintwork, paving, metals, glass and cladding.
2. Dilute FacadeClean Extra Strong maximum 1:4 with water. Before use make sure to wet the surface with water.
3. Apply FacadeClean Extra Strong with a soft brush.
Work from bottom to top to avoid leak marks and staining.
4. Let the product sit 1 to 15 minutes on the surface. Keep the surface saturated during treatment and make sure the product does not dry out.
5. Rinse and clean the surface with high pressure spray and warm water. Use between 50 and 200 bar of pressure, this depends on the surface. Use cold or warm water with a maximum
temperature of 50°C.
6. Repeat the procedure if necessary.


FacadeClean Extra Strong can be used in all dry weather conditions.


Consumption is 5-15 m2/L. Consumption greatly depends on the nature and degree of contamination and porosity of the surface.


Can be kept for at least 24 months in original unopened packaging. Store in a ventilated, cool and frost-free place.


Causes severe burns and eye damage. Do not breathe vapor, mist or spray. Avoid skin and eye contact, wear suitable gloves, protective clothing, face protection and safety glasses.
FacadeClean Extra Strong contains hydrofluoric acid, contact a doctor immediately after contact. After skin contact: Immediately flush the skin with plenty of lukewarm running water, for a maximum of 5 minutes. Then apply a thick layer of calcium gluconate gel to the affected skin. After 2 minutes, rinse off the coat and apply again. Repeat every 2 minutes until the pain subsides or until medical attention is available. Always consult the safety data sheet or our R&D department before use.

Consumption is 5-15 m2/L. Consumption greatly depends on the nature and degree of contamination and porosity of the surface.