Ceradur® AG Anti graffiti ceramic coating

PRODUCT DESCRIPTION

Ceradur® Ag is a ceramic coating based on patented polysilazane technology. These unique ceramic coatings are also called glass coating or liquid glass, because the coating has comparable properties to glass.
Ceradur® Ag has excellent hydrophobic and oleophobic properties. Therefor graffiti, ink, spray-paint and flyposting barely adhere to the surface and are easily removed.
Ceradur® Ag is resistant to strong chemicals and is not affected by graffiti-removers or cleaners.
Ceradur® Ag is ultrathin (0,5 6 μm), colour deepening, transparent and easy-to-clean. Depending on the conditions, the coating offers protection against pollution, erosion, corrosion and moisture for at least 3 years (this depends on the rate of atmospheric contamination and the environment the surface is in).

The method of application of Ceradur® products has significant effect on the durability and quality of the coating. When in doubt or if you have any questions, always contact your MAVRO International advisor.

USE

Ceradur® Ag is suitable for practically all mat, smooth and hard surfaces. CERADUR® AG is often applied on plastic, aluminium, coated surfaces; both mat and weathered (PU, epoxy, polyester, powder coatings). Provided that the coating is applied correctly, the applications are very broad, examples are electrical enclosures, wall cladding and the interior of public transportation.

CHARACTERISTICS

• Protects against the penetration of graffiti and other chemicals
• Excellent hydrophobic and oleophobic properties
• Suitable for practically all smooth and hard surfaces
• Temperature resistant ( up to ~250 °C)
• Retrieves colour from weathered surfaces.

PACKAGING

100 ml, 0,5 l and 1 l.

OPERATING INSTRUCTIONS

1. Thoroughly clean the surface with Uniclean or Uniclean Low Foaming and rinse with water.
2. Degrease the substrate and dry the surface with Isopropanol.
3. Apply Ceradur® Ag with a power sponge, microfibre cloth or HLVP spray (nozzle: 0.8-1.2 mm, 2-3 bar). The coating can be applied with a soft rubbing motion or in one smooth motion. Apply the product with a maximum layer thickness of 0.1 - 8 μm (approx. 10-14 ml per m2). Exceeding the recommended layer thickness may cause the coating to have insufficient adhesion and affect the durability of the coating.

APPLICATION CONDITIONS

Ambient temperature: maximum 30°C, minimum 10°C
Surface temperature: maximum 30°C, minimum 10°C
Relative humidity: maximum 85% and 3oC above the dew point

THEORETICAL CONSUMPTION

Consumption is 60-70 m2/L.

STORAGE AND STABILITY

In original unopened packaging at least 12 months stability. Store in a cool, dry place. Reclosed packages have a shorter shelf life.

SAFETY PRECAUTIONS

Harmful if swallowed. Causes severe burns and eye damage. Highly flammable liquid and vapor. May cause drowsiness or dizziness. Avoid inhalation, skin and eye contact, wear suitable gloves, respirator, protective clothing and safety goggles. If in doubt, always consult the safety data sheet or our R&D department.