Strip-Off Plus
PRODUCT DESCRIPTION
Strip-Off Plus is a powerful stripper for the removal of several layers of paint in one treatment.
Strip-Off Plus is gel-like and therefore adheres well to almost all surfaces.
Strip-Off Plus contains only biodegradable solvents and is free from NMP and methylene chloride.
USE
Strip-Off Plus is universally applicable and removes quickly and effectively alkyd, acrylic, latex, polyurethane, epoxy and 2-component coatings. Strip-Off Plus can be used safely on almost all types of metal, mineral and wooden substrates. Examples are concrete, stucco, granite, limestone, sandstone, masonry, glass and metal. May damage some plastics, always test in advance.
CHARACTERISTICS
• Neutral and therefore friendly to most substrates
• Works also at low temperatures
• Does not contain methylene chloride, NMP, NEP, acids or alkalis.
• Quickly removes multiple layers of paint
• Strong adherence and long open time for optimum performance
• Easy to use
PACKAGING
1 and 10 L.
OPERATING INSTRUCTIONS
1. Apply Strip-Off Plus undiluted with a brush or roller in a thick layer.
2. Allow the product to work in for 30 minutes to 1 hour, depending on the temperature and the number of coats. Prevent the product from drying out, if necessary cover with foil.
3. Spray the dissolved paint from the substrate with high pressure (50 - 300 bar) and hot water (70 - 90°C). Work from the bottom up. Adjust the pressure to the substrate.
4. On sensitive surfaces, scrape away the dissolved paint with a spatula or plastic scraper.
5. After cleaning, rinse the substrate thoroughly with clean water.
APPLICATION CONDITIONS
Strip-Off Plus can be used in all dry weather conditions.
THEORETICAL CONSUMPTION
Consumption 0,25-1 m2/L, depending on the surface and amount of paint layers.
STORAGE AND STABILTY
In original unopened containers shelf life of at least 12 months. Store in a well-ventilated cool place away from ignition sources.
SAFETY PRECAUTIONS
Avoid inhalation, ensure adequate ventilation and wear respiratory protection with brown filter. Avoid skin and eye contact, wear suitable solvent resistant gloves, protective clothing and safety glasses or face shield. If in doubt, always consult the safety data sheet or our R&D department.
