Lime Remover

PRODUCT DESCRIPTION

Lime Remover is an acidic cleaner based on hydrochloric acid for the removal of limescale, carbonates and contaminants caused by salt and soot deposits.

USE

Lime Remover is suitable for cleaning acid-resistant surfaces such as masonry, tiles, floors and glass.

CHARACTERISTICS

• Efficient, fast cleaning
• Is friendly on most surfaces
• Can be used as a saline solution on concrete

PACKAGING

1, 5 and 10 L.

OPERATING INSTRUCTIONS

1. Apply Lime Remover undiluted with a brush.
Pour the product on horizontal parts and spread with a brush or broom.
2. Allow the product to work on the surface for 5-10 minutes. Keep the surface moist during the application time.
3. Rinse and clean the surface with a high-pressure cleaner. Depending on the surface, use a pressure between 50 and 200 bar. Use cold or warm water with a maximum temperature of 50 ° C.
4. Repeat the procedure if necessary.

APPLICATION CONDITIONS

Lime Remover can be used in all dry weather conditions.

CONSUMPTION

Consumption is 3-5 m2/L depending on nature and degree of the contamination and the porosity of the surface.

STORAGE AND STABILTY

Can be stored in original unopened packaging for at least 24 months. Store in a dry, well ventilated cool and frost-free place.

SAFETY PRECAUTIONS

Causes severe burns and eye damage. Avoid skin and eye contact, wear suitable gloves, protective clothing and safety goggles. When in doubt, always consult the safety data sheet or our R&D department.